Recent Posts

71

ER420M / ER420M Programming Software

« Last post by Lindsay McPhee on September 05, 2013, 12:41:12 PM »

 
 
You need a serial cable (and possibly a USB to serial convertor) to use this software

72

ER390M / ER390M Pfrogramming Software

« Last post by Lindsay McPhee on September 05, 2013, 12:40:37 PM »

 
 
You need a serial cable (and possibly a USB to serial convertor) to use this software

73

ER380 ER380M / ER380 Programming Software

« Last post by Lindsay McPhee on September 05, 2013, 12:40:00 PM »

 
 
You need a serial cable (and possibly a USB to serial convertor) to use this software

74

ER230 / ER230 Programming software

« Last post by Lindsay McPhee on September 05, 2013, 12:38:47 PM »

 
You need a serial cable (and possibly a USB to serial convertor) to use this software

75

ER180T / ER180TDL / ER-180T Quick Setup Guide (New Alpha Overlay)...

« Last post by James Chou on September 05, 2013, 12:37:00 PM »

Please see attached for ER-180T (ER-180T, ER-180TDL thermal printer model with small or large cash drawer) Quick Setup Guide.
Attached is the Alpha Overlay that have one letter per button - also known as new version.

76

ER260 ER265 / ER26x User Manual

« Last post by Lindsay McPhee on September 05, 2013, 12:35:23 PM »

 
ER260/265 User Manual attached.

77

ER180 / ER-180 Quick Setup Guide...

« Last post by James Chou on September 05, 2013, 12:30:34 PM »

Please see attached for ER-180 (ER-180B, impact printer model) Quick Setup Guide.
Check the keyboard layout on your register to select between 10 Department and 16 Department version.

78

General / Ethernet Communication with Cash Register

« Last post by James Chou on August 30, 2013, 12:04:10 PM »

If you want to connect your register to your PC, please have a look this document.

79

Sps300 Series (320, 325, 340,345) / Firwmare version 1.011 Released

« Last post by Lindsay McPhee on August 07, 2013, 11:45:27 AM »

Attached is version 1.011. 
 
There are 2 ways to upgrad the firmware on this model.  You will need 1 of the following 2 items
 
1) an ECR serial comms cable (and possibly a USB to serial convertor)
 
OR

2)  An SD Card and a card writer for your computer.

Instructions are included in the attachment

This firmware version requires PC Utility version 1.004 or later as there have been some file structure changes.  Please read the Firmware version info doc in the zip file for full details.

80

SPS300 Series (320, 325, 340,345) / SPS300 Series PC Utility version 1.004

« Last post by Lindsay McPhee on August 07, 2013, 11:43:51 AM »

Hi all,
 
Attached is SPS300 series PC Utiltiy version 1.004 This version is only compatible with firmware version 1.011 and later.