Recent Posts

11

Printer Software / SAM4S Giant 100 Configuration Utility software

« Last post by Lindsay McPhee on March 03, 2017, 11:01:29 AM »

Hi All,

Please find the Giant Tool Version 2.07 attached.  This can be used to configure the Ethernet interfaces.

12

Printer Software / SAM4S Giant Printer Driver Version 1.9.9a

« Last post by Lindsay McPhee on November 16, 2016, 10:16:26 AM »

Hi All,

Please find the driver attached.

13

Sps300 Series (320, 325, 340,345) / SPS3x0 Firmware version 01.022

« Last post by Lindsay McPhee on August 04, 2016, 01:23:55 PM »

Hi All,

Please find the latest and greatest (at time of writing) firmware attached below.

14

Scale Software / CAS LP1 LP-Works utility

« Last post by Lindsay McPhee on June 15, 2016, 03:48:29 PM »

Hi All,

Please find LP works Utility attached.

15

SPS300 Series (320, 325, 340,345) / Re: Spare Parts

« Last post by Lindsay McPhee on June 14, 2016, 12:11:22 PM »

Hi Vince,

I'll email the manual to you.  I don't have an appropriate board to post service manuals on the forum that is restricted from access by the general public.

16

FAQ / MOVED: Spare Parts

« Last post by Lindsay McPhee on June 14, 2016, 11:07:45 AM »

This topic has been moved to SPS300 Series (320, 325, 340,345).

http://www.forum.goodson.com.au/index.php?topic=252.0

17

General / DAO Database Engine

« Last post by Lindsay McPhee on May 20, 2016, 03:16:15 PM »

Hi All,

The attached zip file is used to install a database control system when one is not present in the windows operating system.

18

SPS300 Series (320, 325, 340,345) / Spare Parts

« Last post by northtec on May 19, 2016, 05:40:27 PM »

Looking for Parts manual SPS300 Series
Or need a Comms Board.  The one that controls the Drawer opening etc.
Any advice appreciated
Have 2 machines that the draw will not open on sale finalization or #

19

Ask a Question / Re: sam4s er230 battery replacement

« Last post by Lindsay McPhee on May 17, 2016, 11:56:30 AM »

Hi Susan,

If you see this could you please call us on 02 8875 4544 and ask for the service department.

20

Ask a Question / sam4s er230 battery replacement

« Last post by Susan BEll on May 12, 2016, 01:13:30 PM »

Hi, we have two sam4s er230s.  The user manual comes with no information on battery replacement.  Our older machine (12 months old) is playing up - LCD display goes weird so that it can't be read, but there is no low battery warning.  Wondering if the batteries need replacing (date on bottom of machine is Dec 2016, though note entirely sure what this date means).  Registers are usually plugged in but sometimes work off a battery/inverter system instead of mains power.  Seems to come good once recharged on mains power.  Thanks.